Xfinity Remote Mic Says Try Again

RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.

My family unit has used Comcast Xfinity as its primary cable tv set provider for years.

So when they released their new X1 platform, we figured information technology'd make for the smoothest transition without having to rewire much of our TV equipment.

I liked the way its interface looks, also equally all the streaming services bachelor on it.

1 24-hour interval, equally I switched on my gear up-peak box and Television set, I realized that my remote wasn't working.

I pressed several buttons on the remote control merely nothing happened.

It was and so challenging to decipher all the weird tech-lingo I institute on the Internet.

So I took it upon myself to do the research required to solve the problem.

To fix an Xfinity remote that is not working, try programming and resetting the remote.

If that doesn't immediately fix the Xfinity remote, troubleshoot the unresponsive remote buttons. As a last resort, you can reset your Xfinity Box.

What causes Xfinity Remote to non work?

My first instinct was to just slap the remote against my palm, but something told me that would do no good.

Instead, I looked into the potential reasons for the Xfinity Remote to finish working.

Remote Programming

Dissimilar manufacturers use slightly different IR signals to transmit instructions like irresolute the volume or the aqueduct.

Then you lot have to "program" your remote to send signals that match the signals they've designed to work with the Television receiver.

All information technology ordinarily involves is inputting Xfinity Remote Codes corresponding to the manufacturer with your remote so that the remote knows the make of the TV.

If the remote hasn't been programmed correctly, and then the TV won't be able to sympathise the commands the remote is sending it.

Physically Broken

There is a possibility that your remote hardware might be damaged.

This means that there is something wrong with the physical remote.

Broken hardware is a probable crusade for the remote not working properly.

Dead Battery

Bombardment issues could also be causing your remote to not work.

Even if you've successfully managed to plan and connect your remote to the prepare-tiptop box, if the remote batteries are dead, your Xfinity Remote will not work.

Troubleshoot Unresponsive Remote Buttons

If your Xfinity remote control buttons are not operation or responding properly, then you can troubleshoot the buttons.

This involves pressing and belongings the individual buttons to attempt and find out what'due south causing information technology to malfunction.

More detailed steps are beneath.

Steps:

1. Take your Xfinity remote then press any push on the remote.
2. When you lot printing a button, if yous notice that the LED at the top of the remote is not flashing at all, and then information technology might be a problem with the remote batteries. Change the batteries in your Xfinity Remote and then try pressing a button again.
3. On the other hand, say yous've pressed an unresponsive button and you do see the LED flashing, if yous observe that it's flashing red v times, information technology means that your remote batteries are running very low. All y'all have to exercise now is supersede the old batteries with new ones. Your  remote will start functioning optimally over again.
4. If none of the aforementioned solutions work, don't panic. Just contact Xfinity'southward customer intendance for assistance.

Xfinity Flex Remote Non Working

If you have the Xfinity Flex Streaming Telly Box in particular, you could be facing issues ranging from not being able to actuate it to it not changing volume, to it non irresolute the channels.

You lot can ready information technology past unplugging the HDMI and the USB-C cables and plugging them back in.

Ensure that you utilize the Flex Remote from within ten anxiety away from the TV Box.

If you can't select the language for the interface, try resetting the remote.

Another avenue to get down is the internet road.

Ensure that yous have a expert, potent Wi-Fi connectedness.

If not, try resetting your Xfinity Modem.

You might also endeavor an Xfinity Ethernet connectedness.

You tin can also press the WPS button on the bottom of the Flex streaming Tv Box to reconnect to your network.

If you come across an error screen and yous can't fix the issue on your ain, note the error code on the lesser-right corner of your Boob tube screen.

And so, contact Xfinity Customer Service and permit them know what the error code is.

Programming and Resetting the Remote

In example troubleshooting hasn't worked, another great style to become your remote buttons to piece of work over again is by programming and resetting your remote.

This means unpairing the remote from your Goggle box Box and Television and so resetting the remote control.

The steps for performing this factory reset have been given as follows:

Mill Resetting the Xfinity XR11 Remote with a Setup Push

If you have the XR11 remote model, you can reset your remote with the setup button.

Just follow the steps that have been described below to successfully reset your XR11 remote.

Steps:

1. The first thing you need to do is observe the Setup push. Information technology'll be on the bottom side of the remote.
2. Once yous've establish the setup button, click on that push button. You have to press the button till you meet the LED turns green from red.
3. After the LED has turned green, printing nine-8-1.
4. Subsequently y'all've pressed 9-8-1, the LED should flash green twice. This means that your remote has been successfully reset.

Just think that when you reset your remote, the remote is no longer connected to the gear up-top box.

This means that you lot accept to connect your Xfinity remote to your TV Box again before yous start using the remote.

If yous don't Pair your Xfinity Remote to the Telly Box after resetting the remote, your remote won't work.

Factory Resetting the Xfinity XR15 Remote without a Setup Push

If yous accept the XR15 remote model, information technology means that your remote doesn't have a setup button.

But that doesn't mean you lot can't reset your remote.

All you have to do is follow the steps mentioned beneath to reset your XR15 remote without the setup button.

Steps:

1. The first thing you'll take to do is find 2 buttons. Discover the D (diamond) and A (triangle) buttons.
2. Use both your hands for this step. After you've found the D and A buttons, printing the two buttons at the same time and hold for 3 seconds.
3. After three seconds, you'll run across that the LED colour will modify from red to greenish.
4. When the LED color changes from red to green, just press nine-8-one.
5. After you've pressed 9-8-1, the LED should flash blueish thrice. This means that your remote has been successfully reset.

Later your Xfinity remote has been successfully reset, y'all will need to pair and connect your set-top box with the remote over again.

This is because when your remote is reset, it gets asunder from the set up-top box.

And without reconnecting your Xfinity remote to your Television Box, yous won't exist able to operate the remote.

Factory Resetting the Xfinity XR2 Remote with a Setup Button

Now peradventure you're non like me. Maybe y'all don't have a fancy Xfinity Remote and y'all have an older model.

Luckily, the XR2 Remote has a Setup Button, so the Reset process is pretty straightforward.

To Factory Reset the Xfinity XR2 simply follow these steps:

Steps:

1. The first affair you need to do is find the Setup button. It'll be on the bottom side of the remote.
2. Once you've found the setup button, click on that button. You lot have to press the button till you see the LED alter color from red to green.
3. Afterwards the LED has turned dark-green, press 9-eight-1.
4. After y'all've pressed 9-eight-i, the LED should flash dark-green twice. This ways that your remote has been successfully reset.

Just recollect that when you reset your remote, the remote is no longer connected to the ready-peak box.

So, you take to connect your Xfinity remote to your TV Box again before you beginning using the remote.

If you don't pair your remote to the TV Box after resetting the remote, your remote won't work.

Factory Resetting the Xfinity XR5 Remote with a Setup Button

Maybe you've got an XR5, which is substantially the XR2, but newer.

Luckily, the XR5 Remote has a Setup Button, so the Reset procedure is pretty straightforward.

To Factory Reset the Xfinity XR2 simply follow these steps.

Steps:

1. The first thing y'all demand to practise is observe the Setup push. It'll be on the bottom side of the remote.
2. Once you've establish the setup button, click on that push. Y'all have to press the push till you see the LED change color from red to green.
3. Later the LED has turned green, press 9-8-1.
4. Later on you've pressed nine-8-1, the LED should flash green twice. This means that your remote has been successfully reset.

Just recall that when yous reset your remote, the remote is no longer connected to the fix-top box.

And then, you accept to connect your Xfinity remote to your TV Box once more before you start using the remote.

If yous don't pair your remote to the Idiot box Box afterwards resetting the remote, your remote won't work.

Prepare Your Xfinity X1 Remote with Your TV

After Resetting your Xfinity Remote, yous've got to set it upwards with your Idiot box again or information technology won't work.

Follow these steps to pair your Xfinity Remote with your TV:

Steps:

1. Ensure that your TV is switched on and on the right input, connected to your Xfinity X1 Box.
2. Press and hold the Setup button (XR2, XR5, XR11). You lot'll find it about the bottom of your remote.
3. If you don't accept a Setup button (XR15), press and hold the Xfinity and Info (i) buttons for a few seconds.
4. The LED at the top of the remote volition change colour from red to green.
5. Pressing the Xfinity Button will trigger a 3-digit lawmaking to appear on your Idiot box Screen. Enter this lawmaking on your Remote.
6. Your television will notify y'all when the pairing process has been completed. Y'all can press the "OK" button to confirm and get out the interace.

Reset your Xfinity Box

Now, there is a chance that the offset solutions oasis't worked for y'all.

Don't panic, information technology means that the cause of the problem is dissimilar.

There is a loftier possibility that there is a trouble with your Xfinity Box.

Merely the proficient news is that you can fix this problem on your own.

All y'all take to practice is reset your Xfinity Box. This is one of the start things you practice when your Xfinity Cable Box is Not Working.

Just follow the steps given below:

Steps:

1. Starting time things first, detect the reset push on your set-top box.
2. After you've located the reset push button on your gear up-height box, just press and hold that push for 5 seconds.
3. Another pick you accept instead of manually resetting your Xfinity TV Box is through the "Xfinity My Account" app. Manually resetting your TV Box is called the brusk reset. If y'all desire to reset your TV Box through the app, choose the long reset option. Open the app on whatever device you lot have downloaded and installed it on.
4. After this, just select the long reset option. That'south it! A quick and easy fix.

Xfinity Remote Ruby-red Light: What to Exercise?

If your Xfinity Remote Flashes red five times after you lot press whatever of the buttons, it indicates that your remote'due south batteries are near drained, and they demand to be replaced.

If it flashes from greenish to ruby-red, and then that means that either your Remote and the TV box aren't connected, or that the remote is out of range.

Setup Push button on Xfinity Remote

The Setup Push button is used to set your Xfinity Remote with your Xfinity X1 Idiot box box.

You can notice it on older Xfinity Remotes similar the XR2, XR5, and XR11 usually at the bottom left of the button layout.

However, you might find that newer remotes like the XR15, XR16, and the Xfinity Flex Remotes don't necessarily have a Setup button.

You can yet utilize the same process to pair your Xfinity Remote, but instead of pressing and property the Setup button, you'll have to simultaneously concord downwards the "Xfinity" and "i" buttons.

Voice Command Not Working on Xfinity Remote

If Voice Commands don't work on your Xfinity Remote, but regular buttons get a response from the Tv, then it's possible that your Xfinity Remote batteries are low and need replacing.

Regular button presses only require an IR diode to flash, only Voice Commands crave recording and analyzing your voice, which demands more than battery.

Another possibility is that your Xfinity Television Box wasn't ready properly and so cannot recognize your voice.

Reset your Xfinity Box and Re-Pair your Remote with it to get information technology to recognize your Vocalisation Commands.

Xfinity Remote Won't Turn Off Goggle box Box

If yous tin can't turn off your Xfinity Television receiver Box with your Xfinity Remote, try pressing the Power button on the front panel of the Xfinity Tv set Box.

If you don't desire to turn it off every single time like this, y'all can configure your TV Box to become into Power Saver Mode automatically past going to Settings > Device Settings > Power Preferences > Power Saver > ON.

If that doesn't work, you can just leave your Xfinity Boob tube Box on while turning off your Goggle box.

Xfinity Remote Guide Non Working

Information technology's possible that the Guide button itself isn't working, in which case you'll accept to replace your Comcast Xfinity remote.

Simply it'southward also possible that you lot just demand to reset your remote to go your Xfinity Remote Guide to piece of work over again.

Conclusion

When your Xfinity Remote doesn't work, there aren't a lot of potential causes. Getting it to work again is a straightforward process.

Endeavour troubleshooting the unresponsive buttons.

If that doesn't work, you can try resetting and programming your remote with or without the setup button.

Another good solution would be to reset your set-superlative box.

You May Also Enjoy Reading:

• How To Admission Television Menu With Xfinity Remote?
• How To Alter TV Input With Xfinity Remote
• Comcast Channels Not Working: How To Fix In Seconds [2021]

Often Asked Questions

How do I resync my Xfinity Remote?

The Xfinity remote can be resynced either with or without the setup button.

If you're resetting the XR11 remote with a setup button, printing and concur the setup button till the LED flashes green and then press ix-viii-1.

The LED will flash green twice.

If you're resetting the XR15 remote, printing and hold the D and A buttons simultaneously for 3 seconds.

Press ix-viii-1.

The LED will flash blue thrice indicating that the remote has been reset.

What do y'all do when your remote won't change channels?

The start thing to check if the remote buttons are unresponsive is to check the batteries.

Troubleshooting the unresponsive buttons is the all-time option.

How do I reset my X1 Remote?

Find the setup button on the remote.

Press and agree the setup button till the LED flashes light-green and then printing nine-8-ane.

The LED volition flash green twice.

Why is my TV non responding to the remote?

There might be issues with the remote battery or the remote hardware.

Apart from that, issues with programming and pairing the remote to the set-top box and bug related to the app or device are other probable issues.

What do the A, B, C, and D buttons on an Xfinity Remote practise?

The A button shows y'all the Help Bill of fare, while the B push takes you directly to the Accessibility Settings.

The C button launches the Sports app.

The D button deletes DVR deletes selected DVR Recordings

rushingjusted.blogspot.com

Source: https://robotpoweredhome.com/xfinity-remote-not-working/

Share this post